Bananapi BPi-R3 Mini OpenWrt Firmware

Name: Bananapi BPi-R3 Mini
Brand: Bananapi

The Bananapi BPi-R3 Mini is supported by OpenWrt on the mediatek/filogic target. 8 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	mediatek/filogic	bananapi_bpi-r3-mini

Downloads

Download images

OpenWrt 25.12.5 · mediatek/filogic

Image	Type	sha256
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-snand-preloader.bin	snand-preloader.bin	3d65ca169bc4…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-initramfs-recovery.itb Minimal kernel image, useful for first install or recovery.	kernel	9f911cd6abd3…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-emmc-gpt.bin	emmc-gpt.bin	6decc5e0ac9e…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-snand-bl31-uboot.fip	snand-bl31-uboot.fip	34e421b50f6c…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip	emmc-bl31-uboot.fip	4f3d109a4432…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	2b8dd6ea8aae…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-emmc-preloader.bin	emmc-preloader.bin	d1f272a3a5d4…
openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-snand-factory.bin For first-time flash from stock firmware.	snand-factory.bin	e15f6e0c1ee6…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Bananapi BPi-R3 Mini ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (10)

kmod-eeprom-at24 kmod-hwmon-pwmfan kmod-mt7915e kmod-mt7986-firmware kmod-phy-airoha-en8811h kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-snand-preloader.bin
3d65ca169bc4ad5f0fdbd2f1e4375865de289c1b74719e67c063732b698eed60  openwrt-25.12.5-mediatek-filogic-bananapi_bpi-r3-mini-snand-preloader.bin

Build custom firmware

Need more than the default image for the Bananapi BPi-R3 Mini? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Bananapi devices

More devices on mediatek/filogic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.