Bananapi BPi-R64 OpenWrt Firmware

Name: Bananapi BPi-R64
Brand: Bananapi

The Bananapi BPi-R64 is supported by OpenWrt on the mediatek/mt7622 target. 7 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	mediatek/mt7622	bananapi_bpi-r64

Downloads

Download images

OpenWrt 25.12.5 · mediatek/mt7622

Image	Type	sha256
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	36dace174d6c…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-emmc-bl31-uboot.fip	emmc-bl31-uboot.fip	becec3812a4c…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb Minimal kernel image, useful for first install or recovery.	kernel	582517bba057…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-emmc-preloader.bin	emmc-preloader.bin	b3564f8a7878…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-snand-bl31-uboot.fip	snand-bl31-uboot.fip	78fcb55336df…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-snand-preloader.bin	snand-preloader.bin	f8ba911eada0…
openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-sdcard.img.gz Disk image to write onto an SD card.	sdcard.img.gz	e5a528dbb6a5…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Bananapi BPi-R64 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (6)

kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-mt7622-firmware kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb
36dace174d6cd6815b2d3f06beeb1761c21e68b4e48002b09e554c76370d9e8c  openwrt-25.12.5-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb

Build custom firmware

Need more than the default image for the Bananapi BPi-R64? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Bananapi devices

More devices on mediatek/mt7622

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.