D-Link EAGLE PRO AI M32 A1 OpenWrt Firmware
- CPU
- MediaTek MT7622BV
- RAM
- 512 MB
- Flash
- 128NAND MB
The D-Link EAGLE PRO AI M32 A1 is supported by OpenWrt on the mediatek/mt7622 target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | MediaTek MT7622BV |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1350 MHz |
| RAM | 512 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 3 |
| WLAN hardware | MediaTek MT7975AN, MediaTek MT7915AN |
| Switch | MediaTek MT7531BE |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mediatek/mt7622 | dlink_eagle-pro-ai-m32-a1 |
Downloads
Download images
OpenWrt 25.12.5 · mediatek/mt7622
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 2469ad425a19… |
| openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-squashfs-tftp.bin | tftp | 78b3f1fc4242… |
| openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-squashfs-recovery.bin Recovery image for restoring a device that no longer boots. | recovery | 8e617b3ee9dc… |
| openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 1f865cd3226d… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the D-Link EAGLE PRO AI M32 A1 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-mt7915-firmware
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-mt7622-firmware kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-initramfs-kernel.bin 2469ad425a19e3e7c70bfd9755d45bac5762a8637187a4bbac7f23e9e650cc7a openwrt-25.12.5-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the D-Link EAGLE PRO AI M32 A1? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More D-Link devices
- D-Link AQUILA PRO AI E30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M60 A1 OpenWrt firmware
- D-Link COVR-C1200 A1 OpenWrt firmware
- D-Link COVR-P2500 A1 OpenWrt firmware
- D-Link COVR-X1860 A1 OpenWrt firmware
- D-Link DAP-1325 A1 OpenWrt firmware
- D-Link DAP-1330 A1 OpenWrt firmware
More devices on mediatek/mt7622
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.