Buffalo WSR-3200AX4S OpenWrt Firmware

CPU
MediaTek MT7622B
RAM
512 MB
Flash
128NAND MB

The Buffalo WSR-3200AX4S is supported by OpenWrt on the mediatek/mt7622 target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUMediaTek MT7622B
CPU cores2
CPU frequency1350 MHz
RAM512 MB
Flash128NAND MB
1 Gbit Ethernet ports5
WLAN hardwareMediaTek MT7622B, MediaTek MT7915
SwitchMediaTek MT7531

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5mediatek/mt7622buffalo_wsr-3200ax4s

Downloads

Download images

OpenWrt 25.12.5 · mediatek/mt7622

ImageTypesha256
openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-squashfs-factory-uboot.bin

For first-time flash from stock firmware.

factory-uboot144729815809
openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-squashfs-factory.bin

For first-time flash from stock firmware.

factoryd26b837423ca
openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade57f3e714614d
openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel33c78fc1f17d

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Buffalo WSR-3200AX4S ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (1)

kmod-mt7915-firmware

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-mt7622-firmware kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

  • First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-squashfs-factory-uboot.bin
    14472981580922bb723b5eed9b654c78c2463cf25f8a3defe3a07c734936301c  openwrt-25.12.5-mediatek-mt7622-buffalo_wsr-3200ax4s-squashfs-factory-uboot.bin

Build custom firmware

Need more than the default image for the Buffalo WSR-3200AX4S? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device