CMCC A10 (OpenWrt U-Boot layout) OpenWrt Firmware
The CMCC A10 (OpenWrt U-Boot layout) is supported by OpenWrt on the mediatek/filogic target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mediatek/filogic | cmcc_a10-ubootmod |
Downloads
Download images
OpenWrt 25.12.5 · mediatek/filogic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-squashfs-sysupgrade.itb Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e520dccf8edd… |
| openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip | bl31-uboot.fip | 17a9177cea21… |
| openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-initramfs-recovery.itb Minimal kernel image, useful for first install or recovery. | kernel | 955b1d942115… |
| openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin | preloader.bin | ad13725b8256… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the CMCC A10 (OpenWrt U-Boot layout) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (3)
kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-squashfs-sysupgrade.itb e520dccf8edd8c13988a689e9083d8a9984495f8591312d4fef5e6ddf02b01d9 openwrt-25.12.5-mediatek-filogic-cmcc_a10-ubootmod-squashfs-sysupgrade.itb
Build custom firmware
Need more than the default image for the CMCC A10 (OpenWrt U-Boot layout)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More CMCC devices
- CMCC A10 (stock layout) OpenWrt firmware
- CMCC PZ-L8 OpenWrt firmware
- CMCC RAX3000M OpenWrt firmware
- CMCC RM2-6 OpenWrt firmware
More devices on mediatek/filogic
- ABT ASR3000 OpenWrt firmware
- Acelink EW-7886CAX OpenWrt firmware
- Acer Connect Vero W6m OpenWrt firmware
- Acer Predator Connect W6 OpenWrt firmware
- Acer Predator Connect W6d OpenWrt firmware
- Acer Predator Connect W6x (OpenWrt U-Boot Layout) OpenWrt firmware
- Acer Predator Connect W6x (Stock Layout) OpenWrt firmware
- Adtran SDG-8612 OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.