Compex WPJ344 16M OpenWrt Firmware

CPU
Atheros AR9344
RAM
128 MB
Flash
16 MB

The Compex WPJ344 16M is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUAtheros AR9344
CPU cores1
CPU frequency533 MHz
RAM128 MB
Flash16 MB
1 Gbit Ethernet ports2
WLAN hardwareAtheros AR9344, Compex Atheros WLE300 series mini-PCIe
SwitchQualcomm Atheros QCA8334

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/genericcompex_wpj344-16m
ImmortalWrt25.12.1ath79/genericcompex_wpj344-16m

Downloads

Download images

OpenWrt 25.12.5 · ath79/generic

ImageTypesha256
openwrt-25.12.5-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradefef94ed7b12f
openwrt-25.12.5-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bincpximg-6a0824c84ee22ab5
openwrt-25.12.5-ath79-generic-compex_wpj344-16m-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernele7c2c68db4d3

ImmortalWrt 25.12.1 · ath79/generic

ImageTypesha256
immortalwrt-25.12.1-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade31233b23e8e1
immortalwrt-25.12.1-ath79-generic-compex_wpj344-16m-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel8df7ad1d7b99
immortalwrt-25.12.1-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bincpximg-6a081b892737e3ee

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Compex WPJ344 16M ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/generic

Device packages (1)

kmod-usb2

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ath79/generic

Device packages (1)

kmod-usb2

Target default packages (33)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin
    fef94ed7b12f6ff40dac8622e3e2fa1662ac53b9e04e5b9798cba44a5c7ae56c  openwrt-25.12.5-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Compex WPJ344 16M? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device