Compex WPJ563 OpenWrt Firmware

CPU
Qualcomm Atheros QCA9563
RAM
128 MB
Flash
16 MB

The Compex WPJ563 is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUQualcomm Atheros QCA9563
CPU cores1
CPU frequency775 MHz
RAM128 MB
Flash16 MB
1 Gbit Ethernet ports2
WLAN hardwareQualcomm Atheros QCA9563
SwitchAtheros AR8327

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/genericcompex_wpj563
ImmortalWrt25.12.1ath79/genericcompex_wpj563

Downloads

Download images

OpenWrt 25.12.5 · ath79/generic

ImageTypesha256
openwrt-25.12.5-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradefe6a74dfdc57
openwrt-25.12.5-ath79-generic-compex_wpj563-squashfs-cpximg-7a02.bincpximg-7a02345af6c95838
openwrt-25.12.5-ath79-generic-compex_wpj563-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel29686b3cdbfe

ImmortalWrt 25.12.1 · ath79/generic

ImageTypesha256
immortalwrt-25.12.1-ath79-generic-compex_wpj563-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelb9d9320a35a4
immortalwrt-25.12.1-ath79-generic-compex_wpj563-squashfs-cpximg-7a02.bincpximg-7a02ab94a569e8e7
immortalwrt-25.12.1-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradee0a74d676a82

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Compex WPJ563 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/generic

Device packages (2)

kmod-usb2 kmod-usb3

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ath79/generic

Device packages (2)

kmod-usb2 kmod-usb3

Target default packages (33)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin
    fe6a74dfdc573b798054a8e819e61fb972b0dd0b513874c73dd3ed8de7442959  openwrt-25.12.5-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Compex WPJ563? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device