DomyWifi DW33D OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9558-AT4A
- RAM
- 256 MB
- Flash
- 16, 128NAND MB
The DomyWifi DW33D is supported by OpenWrt/ImmortalWrt on the ath79/nand target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9558-AT4A |
|---|---|
| CPU cores | 1 |
| CPU frequency | 720 MHz |
| RAM | 256 MB |
| Flash | 16, 128NAND MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880 |
| Switch | Qualcomm Atheros QCA8337N-AL3C |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/nand | domywifi_dw33d |
| ImmortalWrt | 25.12.1 | ath79/nand | domywifi_dw33d |
Downloads
Download images
OpenWrt 25.12.5 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-nand-domywifi_dw33d-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f61c01c941b1… |
| openwrt-25.12.5-ath79-nand-domywifi_dw33d-squashfs-factory.bin For first-time flash from stock firmware. | factory | fd7e3139d355… |
| openwrt-25.12.5-ath79-nand-domywifi_dw33d-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3204ce8be9ff… |
ImmortalWrt 25.12.1 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-nand-domywifi_dw33d-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 95768b369b2d… |
| immortalwrt-25.12.1-ath79-nand-domywifi_dw33d-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | b66fe4ef1d86… |
| immortalwrt-25.12.1-ath79-nand-domywifi_dw33d-squashfs-factory.bin For first-time flash from stock firmware. | factory | 9d7ced46fe53… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the DomyWifi DW33D ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/nand
Device packages (5)
kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/nand
Device packages (5)
kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
Target default packages (33)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-nand-domywifi_dw33d-initramfs-kernel.bin f61c01c941b1739b224ef8e0fca72fdce6c42a5eb0bfaeb962221d3a37225b8e openwrt-25.12.5-ath79-nand-domywifi_dw33d-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the DomyWifi DW33D? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More DomyWifi devices
More devices on ath79/nand
- 8devices Rambutan OpenWrt firmware
- Aerohive HiveAP 121 OpenWrt firmware
- Dongwon T&I DW02-412H (128M) OpenWrt firmware
- Dongwon T&I DW02-412H (64M) OpenWrt firmware
- GL.iNet GL-AR300M NAND OpenWrt firmware
- GL.iNet GL-AR300M NOR OpenWrt firmware
- GL.iNet GL-AR750S NOR OpenWrt firmware
- GL.iNet GL-AR750S NOR/NAND OpenWrt firmware
Upstream
Upstream & source
- downloads.openwrt.org — ath79/nand 25.12.5
- downloads.immortalwrt.org — ath79/nand 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.