GL.iNet GL-AR300M NAND OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9531
- RAM
- 128 MB
- Flash
- 16, 128NAND MB
The GL.iNet GL-AR300M NAND is supported by OpenWrt/ImmortalWrt on the ath79/nand target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9531 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 650 MHz |
| RAM | 128 MB |
| Flash | 16, 128NAND MB |
| 100 Mbit Ethernet ports | 2 |
| WLAN hardware | Qualcomm Atheros QCA9531 |
| Switch | Qualcomm Atheros QCA9531 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/nand | glinet_gl-ar300m-nand |
| ImmortalWrt | 25.12.1 | ath79/nand | glinet_gl-ar300m-nand |
Downloads
Download images
OpenWrt 25.12.5 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-nand-glinet_gl-ar300m-nand-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 6d962d031d6f… |
| openwrt-25.12.5-ath79-nand-glinet_gl-ar300m-nand-squashfs-factory.img For first-time flash from stock firmware. | factory | af22761d3fde… |
| openwrt-25.12.5-ath79-nand-glinet_gl-ar300m-nand-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 6962e9aff6cc… |
ImmortalWrt 25.12.1 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-nand-glinet_gl-ar300m-nand-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3ee15a302fe8… |
| immortalwrt-25.12.1-ath79-nand-glinet_gl-ar300m-nand-squashfs-factory.img For first-time flash from stock firmware. | factory | 1c169b2b83ea… |
| immortalwrt-25.12.1-ath79-nand-glinet_gl-ar300m-nand-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f50aa6e2e67b… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the GL.iNet GL-AR300M NAND ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/nand
Device packages (1)
kmod-usb2
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/nand
Device packages (1)
kmod-usb2
Target default packages (33)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-nand-glinet_gl-ar300m-nand-squashfs-sysupgrade.bin 6d962d031d6f28379139ef4af3d02bfa4b3f7c80751fe769601857eb3f765023 openwrt-25.12.5-ath79-nand-glinet_gl-ar300m-nand-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the GL.iNet GL-AR300M NAND? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More GL.iNet devices
- GL.iNet 6408 OpenWrt firmware
- GL.iNet 6416 OpenWrt firmware
- GL.iNet GL-A1300 OpenWrt firmware
- GL.iNet GL-AP1300 OpenWrt firmware
- GL.iNet GL-AR150 OpenWrt firmware
- GL.iNet GL-AR300M Lite OpenWrt firmware
- GL.iNet GL-AR300M NOR OpenWrt firmware
- GL.iNet GL-AR300M16 OpenWrt firmware
More devices on ath79/nand
Upstream
Upstream & source
- downloads.openwrt.org — ath79/nand 25.12.5
- downloads.immortalwrt.org — ath79/nand 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.