EnGenius EWS2910P v1 OpenWrt Firmware

CPU: Realtek RTL8380M
RAM: 256 MB
Flash: 32 MB

The EnGenius EWS2910P v1 is supported by OpenWrt on the realtek/rtl838x target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPU	Realtek RTL8380M
CPU cores	1
CPU frequency	500 MHz
RAM	256 MB
Flash	32 MB
1 Gbit Ethernet ports	8
Switch	Realtek RTL8380M

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	realtek/rtl838x	engenius_ews2910p-v1

Downloads

Download images

OpenWrt 25.12.5 · realtek/rtl838x

Image	Type	sha256
openwrt-25.12.5-realtek-rtl838x-engenius_ews2910p-v1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	b6337d52f24d…
openwrt-25.12.5-realtek-rtl838x-engenius_ews2910p-v1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	0a58fcd023bd…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the EnGenius EWS2910P v1 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (1)

realtek-poe

Target default packages (21)

apk-mbedtls base-files ca-bundle dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug libc libgcc libustream-mbedtls logd mtd netifd odhcp6c procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-realtek-rtl838x-engenius_ews2910p-v1-squashfs-sysupgrade.bin
b6337d52f24d4e40d8880c6f110c9d5670eb80862563f1945e4fba0f56725b3b  openwrt-25.12.5-realtek-rtl838x-engenius_ews2910p-v1-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the EnGenius EWS2910P v1? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More EnGenius devices

More devices on realtek/rtl838x

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.