GL.iNet GL-X3000 OpenWrt Firmware
The GL.iNet GL-X3000 is supported by OpenWrt on the mediatek/filogic target. 5 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mediatek/filogic | glinet_gl-x3000 |
Downloads
Download images
OpenWrt 25.12.5 · mediatek/filogic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 8a8530310bde… |
| openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-squashfs-factory.bin For first-time flash from stock firmware. | factory | 05322bc23c56… |
| openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip | bl31-uboot.fip | cad55fa99e66… |
| openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | cf97b8aeb3a1… |
| openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-preloader.bin | preloader.bin | d057e01a92e5… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the GL.iNet GL-X3000 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (11)
kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware mkf2fs kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-squashfs-sysupgrade.bin 8a8530310bde83d826786291797cec65c7a7ced885537848206dd94d90a08d64 openwrt-25.12.5-mediatek-filogic-glinet_gl-x3000-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the GL.iNet GL-X3000? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More GL.iNet devices
- GL.iNet 6408 OpenWrt firmware
- GL.iNet 6416 OpenWrt firmware
- GL.iNet GL-A1300 OpenWrt firmware
- GL.iNet GL-AP1300 OpenWrt firmware
- GL.iNet GL-AR150 OpenWrt firmware
- GL.iNet GL-AR300M Lite OpenWrt firmware
- GL.iNet GL-AR300M NAND OpenWrt firmware
- GL.iNet GL-AR300M NOR OpenWrt firmware
More devices on mediatek/filogic
- ABT ASR3000 OpenWrt firmware
- Acelink EW-7886CAX OpenWrt firmware
- Acer Connect Vero W6m OpenWrt firmware
- Acer Predator Connect W6 OpenWrt firmware
- Acer Predator Connect W6d OpenWrt firmware
- Acer Predator Connect W6x (OpenWrt U-Boot Layout) OpenWrt firmware
- Acer Predator Connect W6x (Stock Layout) OpenWrt firmware
- Adtran SDG-8612 OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.