SolidRun ClearFog Pro OpenWrt Firmware
- CPU
- Marvell Armada 388 88F6828
- RAM
- 1024 MB
- Flash
- eMMC, microSD
The SolidRun ClearFog Pro is supported by OpenWrt on the mvebu/cortexa72 target. 7 firmware images are available from the official OpenWrt 25.12.5 and OpenWrt 25.12.5 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Marvell Armada 388 88F6828 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1600 MHz |
| RAM | 1024 MB |
| Flash | eMMC, microSD |
| 1 Gbit Ethernet ports | 6 |
| Switch | Marvell 88E6176 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mvebu/cortexa72 | solidrun_clearfog-pro |
| OpenWrt | 25.12.5 | mvebu/cortexa9 | solidrun_clearfog-pro-a1 |
Downloads
Download images
OpenWrt 25.12.5 · mvebu/cortexa72
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 18e1c373e009… |
| openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | 50e913b6e971… |
| openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | bc8a511d30e6… |
| openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-ext4-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 99293252c9fc… |
OpenWrt 25.12.5 · mvebu/cortexa9
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa9-solidrun_clearfog-pro-a1-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | feafa7aeb05e… |
| openwrt-25.12.5-mvebu-cortexa9-solidrun_clearfog-pro-a1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f6a71681bcc6… |
| openwrt-25.12.5-mvebu-cortexa9-solidrun_clearfog-pro-a1-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | c81933bcfdaa… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the SolidRun ClearFog Pro ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · mvebu/cortexa72
Device packages (2)
kmod-i2c-mux-pca954x kmod-dsa-mv88e6xxx
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
OpenWrt 25.12.5 · mvebu/cortexa9
Device packages (4)
mkf2fs e2fsprogs partx-utils kmod-dsa-mv88e6xxx
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-initramfs-kernel.bin 18e1c373e0098c1d5fa572eb39468aa5abfbfa78401cc83adf22baf9771340b2 openwrt-25.12.5-mvebu-cortexa72-solidrun_clearfog-pro-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the SolidRun ClearFog Pro? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More SolidRun devices
- SolidRun ClearFog Base OpenWrt firmware
- SolidRun Clearfog GT-8K OpenWrt firmware
- SolidRun CuBox-i OpenWrt firmware
- SolidRun MACCHIATObin Double Shot OpenWrt firmware
- SolidRun MACCHIATObin Single Shot OpenWrt firmware
More devices on mvebu/cortexa72
Upstream
Upstream & source
- downloads.openwrt.org — mvebu/cortexa72 25.12.5
- downloads.openwrt.org — mvebu/cortexa9 25.12.5
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.