Check Point V-80 OpenWrt Firmware
- CPU
- Marvell Armada 7040 88F7040
- RAM
- 2048 MB
- Flash
- eMMC, microSD
The Check Point V-80 is supported by OpenWrt on the mvebu/cortexa72 target. 8 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Marvell Armada 7040 88F7040 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1400 MHz |
| RAM | 2048 MB |
| Flash | eMMC, microSD |
| 1 Gbit Ethernet ports | 6 |
| Switch | Marvell 88E6352 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mvebu/cortexa72 | checkpoint_v-80 |
Downloads
Download images
OpenWrt 25.12.5 · mvebu/cortexa72
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-ext4-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 2b55cf290a40… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | cf44b7c8cd2e… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-initramfs.scr Minimal kernel image, useful for first install or recovery. | initramfs.scr | 8be7536414a9… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-squashfs-sysupgrade.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 295eb61a2795… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | 77b75d02cc3a… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-ext4-sysupgrade.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | b351a9789302… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-initramfs.dtb Minimal kernel image, useful for first install or recovery. | initramfs.dtb | 9d94a94a3721… |
| openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | a954bdb2e258… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Check Point V-80 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (3)
kmod-dsa-mv88e6xxx kmod-hwmon-nct7802 kmod-rtc-ds1307
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-ext4-sdcard.img.gz 2b55cf290a40193d17398ee96b67cfceba67ae36fba7207159d716c14cfde778 openwrt-25.12.5-mvebu-cortexa72-checkpoint_v-80-ext4-sdcard.img.gz
Build custom firmware
Need more than the default image for the Check Point V-80? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Check Point devices
More devices on mvebu/cortexa72
- Globalscale MOCHAbin OpenWrt firmware
- iEi Puzzle-M901 OpenWrt firmware
- iEi Puzzle-M902 OpenWrt firmware
- Marvell Armada 7040 Development Board OpenWrt firmware
- Marvell Armada 8040 Development Board OpenWrt firmware
- MikroTik RB5009 OpenWrt firmware
- SolidRun Clearfog GT-8K OpenWrt firmware
- SolidRun ClearFog Pro OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.