iEi Puzzle-M901 OpenWrt Firmware

CPU
Marvell OCTEON CN9131
RAM
4096 MB
Flash
eMMC

The iEi Puzzle-M901 is supported by OpenWrt on the mvebu/cortexa72 target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUMarvell OCTEON CN9131
CPU cores4
CPU frequency2200 MHz
RAM4096 MB
FlasheMMC
2.5 Gbit Ethernet ports6
SwitchMarvell 88F8215

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5mvebu/cortexa72iei_puzzle-m901

Downloads

Download images

OpenWrt 25.12.5 · mvebu/cortexa72

ImageTypesha256
openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-squashfs-sdcard.img.gz

Disk image to write onto an SD card.

sdcardb4e5f49b6066
openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-ext4-sdcard.img.gz

Disk image to write onto an SD card.

sdcard034791e87f44
openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-targz-rootfs.tar.gz

Rootfs archive for Docker / LXC containers.

rootfse460f4e361e5
openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel8beb56dd512f

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the iEi Puzzle-M901 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (1)

kmod-rtc-ds1307

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd

Installation notes

  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-squashfs-sdcard.img.gz
    b4e5f49b6066799b2f97dd03c156ebe0066b20686edbc70dddf781d2a5d8a995  openwrt-25.12.5-mvebu-cortexa72-iei_puzzle-m901-squashfs-sdcard.img.gz

Build custom firmware

Need more than the default image for the iEi Puzzle-M901? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More iEi devices

More devices on mvebu/cortexa72

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.