Globalscale MOCHAbin OpenWrt Firmware
- CPU
- Marvell Armada 7040 88F7040
- RAM
- 4096 MB
- Flash
- 4, eMMC MB
The Globalscale MOCHAbin is supported by OpenWrt on the mvebu/cortexa72 target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Marvell Armada 7040 88F7040 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1400 MHz |
| RAM | 4096 MB |
| Flash | 4, eMMC MB |
| 1 Gbit Ethernet ports | 5 |
| Switch | Marvell 88E6341 TOPAZ |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mvebu/cortexa72 | globalscale_mochabin |
Downloads
Download images
OpenWrt 25.12.5 · mvebu/cortexa72
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 83aa8fe72a68… |
| openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 13f3341cb848… |
| openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | 05cef345d2ac… |
| openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-ext4-sdcard.img.gz Disk image to write onto an SD card. | sdcard | d19a11548532… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Globalscale MOCHAbin ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-dsa-mv88e6xxx
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-initramfs-kernel.bin 83aa8fe72a68cb94b4d72192f08c4809d4fb326f1f885ecedf741fee652fb75d openwrt-25.12.5-mvebu-cortexa72-globalscale_mochabin-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the Globalscale MOCHAbin? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Globalscale devices
More devices on mvebu/cortexa72
- Check Point V-80 OpenWrt firmware
- Check Point V-81 OpenWrt firmware
- iEi Puzzle-M901 OpenWrt firmware
- iEi Puzzle-M902 OpenWrt firmware
- Marvell Armada 7040 Development Board OpenWrt firmware
- Marvell Armada 8040 Development Board OpenWrt firmware
- MikroTik RB5009 OpenWrt firmware
- SolidRun Clearfog GT-8K OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.