Aerohive HiveAP-330 OpenWrt Firmware
- CPU
- Freescale P1020
- RAM
- 256 MB
- Flash
- 64 MB
The Aerohive HiveAP-330 is supported by OpenWrt on the mpc85xx/p1020 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Freescale P1020 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 533 MHz |
| RAM | 256 MB |
| Flash | 64 MB |
| 1 Gbit Ethernet ports | 2 |
| WLAN hardware | 2x Atheros AR9390 (mini-PCIe) |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1020 | aerohive_hiveap-330 |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1020
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1020-aerohive_hiveap-330-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3cbce4c0214c… |
| openwrt-25.12.5-mpc85xx-p1020-aerohive_hiveap-330-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f3e18b5b6e18… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Aerohive HiveAP-330 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
kmod-tpm-i2c-atmel kmod-hwmon-lm70
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1020-aerohive_hiveap-330-squashfs-sysupgrade.bin 3cbce4c0214c35d5608c9b135c7fa904b570b3509db2d1d7cfa96b2fc703720e openwrt-25.12.5-mpc85xx-p1020-aerohive_hiveap-330-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Aerohive HiveAP-330? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Aerohive devices
More devices on mpc85xx/p1020
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.