Hewlett-Packard MSM460 OpenWrt Firmware
The Hewlett-Packard MSM460 is supported by OpenWrt on the mpc85xx/p1020 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1020 | hpe_msm460 |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1020
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1020-hpe_msm460-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3b3e1e870b2a… |
| openwrt-25.12.5-mpc85xx-p1020-hpe_msm460-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 13047c64ccfc… |
| openwrt-25.12.5-mpc85xx-p1020-hpe_msm460-squashfs-factory.bin For first-time flash from stock firmware. | factory | f589a0d37928… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Hewlett-Packard MSM460 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1020-hpe_msm460-squashfs-sysupgrade.bin 3b3e1e870b2ab7f41aa55e74b12a45ab7acd46a22fd7ed1fd722f3fb6d446fb2 openwrt-25.12.5-mpc85xx-p1020-hpe_msm460-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Hewlett-Packard MSM460? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on mpc85xx/p1020
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.