Enterasys WS-AP3710i OpenWrt Firmware
- CPU
- Freescale P1020
- RAM
- 256 MB
- Flash
- 32 MB
The Enterasys WS-AP3710i is supported by OpenWrt on the mpc85xx/p1020 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Freescale P1020 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 800 MHz |
| RAM | 256 MB |
| Flash | 32 MB |
| 1 Gbit Ethernet ports | 1 |
| WLAN hardware | Atheros AR9590 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1020 | enterasys_ws-ap3710i |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1020
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1020-enterasys_ws-ap3710i-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | d5624d4322cc… |
| openwrt-25.12.5-mpc85xx-p1020-enterasys_ws-ap3710i-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 739922dcdd22… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Enterasys WS-AP3710i ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1020-enterasys_ws-ap3710i-squashfs-sysupgrade.bin d5624d4322ccfdf5661169c23f58c52607f5444dc551d9f9eab8f87cbfb034f1 openwrt-25.12.5-mpc85xx-p1020-enterasys_ws-ap3710i-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Enterasys WS-AP3710i? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Enterasys devices
More devices on mpc85xx/p1020
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.