OCEDO Panda OpenWrt Firmware
- CPU
- Freescale P1020
- RAM
- 1024 MB
- Flash
- 256NAND MB
The OCEDO Panda is supported by OpenWrt on the mpc85xx/p1020 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Freescale P1020 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 800 MHz |
| RAM | 1024 MB |
| Flash | 256NAND MB |
| 1 Gbit Ethernet ports | 10 |
| WLAN hardware | Atheros AR9382 |
| Switch | Broadcom BCM53128 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1020 | ocedo_panda |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1020
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1020-ocedo_panda-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f6d846df3a9f… |
| openwrt-25.12.5-mpc85xx-p1020-ocedo_panda-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | b8bf5d6a62c7… |
| openwrt-25.12.5-mpc85xx-p1020-ocedo_panda-squashfs-fdt.bin | fdt | 0e6dd18f47c5… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the OCEDO Panda ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-rtc-ds1307
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1020-ocedo_panda-initramfs-kernel.bin f6d846df3a9fbf710c0285347af8548fc17f6fa61be3b4e075bd8964ccff5250 openwrt-25.12.5-mpc85xx-p1020-ocedo_panda-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the OCEDO Panda? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on mpc85xx/p1020
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.