GL.iNet GL-E750 OpenWrt Firmware

The GL.iNet GL-E750 is supported by OpenWrt/ImmortalWrt on the ath79/nand target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/nandglinet_gl-e750
ImmortalWrt25.12.1ath79/nandglinet_gl-e750

Downloads

Download images

OpenWrt 25.12.5 · ath79/nand

ImageTypesha256
openwrt-25.12.5-ath79-nand-glinet_gl-e750-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel56c8615884c4
openwrt-25.12.5-ath79-nand-glinet_gl-e750-squashfs-factory.img

For first-time flash from stock firmware.

factory653317e7d01d
openwrt-25.12.5-ath79-nand-glinet_gl-e750-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade78d24f6da5da

ImmortalWrt 25.12.1 · ath79/nand

ImageTypesha256
immortalwrt-25.12.1-ath79-nand-glinet_gl-e750-squashfs-factory.img

For first-time flash from stock firmware.

factory06fb41d74db2
immortalwrt-25.12.1-ath79-nand-glinet_gl-e750-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade5331f3f66ced
immortalwrt-25.12.1-ath79-nand-glinet_gl-e750-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel017240418e96

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the GL.iNet GL-E750 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/nand

Device packages (6)

kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ath79/nand

Device packages (6)

kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi

Target default packages (33)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-nand-glinet_gl-e750-initramfs-kernel.bin
    56c8615884c48c791ee130f8854ab8fa6c516256b69d8310ff8c2ed6bd75abd6  openwrt-25.12.5-ath79-nand-glinet_gl-e750-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the GL.iNet GL-E750? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device