Xunlong Orange Pi 2 OpenWrt Firmware
- CPU
- Allwinner H3
- RAM
- 1024 MB
- Flash
- microSDHC
The Xunlong Orange Pi 2 is supported by OpenWrt on the sunxi/cortexa7 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Allwinner H3 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1300 MHz |
| RAM | 1024 MB |
| Flash | microSDHC |
| 100 Mbit Ethernet ports | 1 |
| WLAN hardware | Realtek RTL8198ETV |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | sunxi/cortexa7 | xunlong_orangepi-2 |
Downloads
Download images
OpenWrt 25.12.5 · sunxi/cortexa7
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-sunxi-cortexa7-xunlong_orangepi-2-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 51d73365addd… |
| openwrt-25.12.5-sunxi-cortexa7-xunlong_orangepi-2-ext4-sdcard.img.gz Disk image to write onto an SD card. | sdcard | a89168406672… |
| openwrt-25.12.5-sunxi-cortexa7-xunlong_orangepi-2-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 887a1ca131a8… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Xunlong Orange Pi 2 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-rtc-sunxi
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-sunxi-cortexa7-xunlong_orangepi-2-initramfs-kernel.bin 51d73365addd6d08bf49d06f1931d195d7ffa20ec93f8ebe629c8cc08c07b4d7 openwrt-25.12.5-sunxi-cortexa7-xunlong_orangepi-2-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the Xunlong Orange Pi 2? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Xunlong devices
- Xunlong Orange Pi One OpenWrt firmware
- Xunlong Orange Pi One Plus OpenWrt firmware
- Xunlong Orange Pi PC OpenWrt firmware
- Xunlong Orange Pi PC 2 OpenWrt firmware
- Xunlong Orange Pi PC Plus OpenWrt firmware
- Xunlong Orange Pi Plus OpenWrt firmware
- Xunlong Orange Pi R1 OpenWrt firmware
- Xunlong Orange Pi R1 Plus OpenWrt firmware
More devices on sunxi/cortexa7
- Cubietech Cubieboard2 OpenWrt firmware
- Cubietech Cubietruck OpenWrt firmware
- FriendlyARM NanoPi M1 Plus OpenWrt firmware
- FriendlyARM NanoPi NEO OpenWrt firmware
- FriendlyARM NanoPi NEO Air OpenWrt firmware
- FriendlyARM NanoPi R1 OpenWrt firmware
- FriendlyARM ZeroPi OpenWrt firmware
- Lamobo Lamobo R1 OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.