Xunlong Orange Pi R1 Plus OpenWrt Firmware
- CPU
- Rockchip RK3328
- RAM
- 1024 MB
- Flash
- 16, microSDHC MB
The Xunlong Orange Pi R1 Plus is supported by OpenWrt on the rockchip/armv8 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Rockchip RK3328 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1500 MHz |
| RAM | 1024 MB |
| Flash | 16, microSDHC MB |
| 1 Gbit Ethernet ports | 2 |
| WLAN hardware | none |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | rockchip/armv8 | xunlong_orangepi-r1-plus |
Downloads
Download images
OpenWrt 25.12.5 · rockchip/armv8
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-rockchip-armv8-xunlong_orangepi-r1-plus-ext4-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 01726bbcfad9… |
| openwrt-25.12.5-rockchip-armv8-xunlong_orangepi-r1-plus-squashfs-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e015e92ae755… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Xunlong Orange Pi R1 Plus ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-usb-net-rtl8152
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-rockchip-armv8-xunlong_orangepi-r1-plus-ext4-sysupgrade.img.gz 01726bbcfad9833cda448088fdcd385793c8d1762501a3659e2ca88330bb46a6 openwrt-25.12.5-rockchip-armv8-xunlong_orangepi-r1-plus-ext4-sysupgrade.img.gz
Build custom firmware
Need more than the default image for the Xunlong Orange Pi R1 Plus? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Xunlong devices
- Xunlong Orange Pi 2 OpenWrt firmware
- Xunlong Orange Pi One OpenWrt firmware
- Xunlong Orange Pi One Plus OpenWrt firmware
- Xunlong Orange Pi PC OpenWrt firmware
- Xunlong Orange Pi PC 2 OpenWrt firmware
- Xunlong Orange Pi PC Plus OpenWrt firmware
- Xunlong Orange Pi Plus OpenWrt firmware
- Xunlong Orange Pi R1 OpenWrt firmware
More devices on rockchip/armv8
- ArmSoM Sige7 OpenWrt firmware
- Firefly ROC-RK3328-CC OpenWrt firmware
- FriendlyARM NanoPC T4 OpenWrt firmware
- FriendlyARM NanoPC T6 OpenWrt firmware
- FriendlyARM NanoPi R2C OpenWrt firmware
- FriendlyARM NanoPi R2C Plus OpenWrt firmware
- FriendlyARM NanoPi R2S OpenWrt firmware
- FriendlyARM NanoPi R3S OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.