ZTE MF286A OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9563
- RAM
- 128 MB
- Flash
- 2, 128NAND MB
The ZTE MF286A is supported by OpenWrt/ImmortalWrt on the ath79/nand target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9563 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 775 MHz |
| RAM | 128 MB |
| Flash | 2, 128NAND MB |
| 1 Gbit Ethernet ports | 4 |
| WLAN hardware | Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9886 |
| Switch | Qualcomm Atheros QCA8337v2 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/nand | zte_mf286a |
| ImmortalWrt | 25.12.1 | ath79/nand | zte_mf286a |
Downloads
Download images
OpenWrt 25.12.5 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-nand-zte_mf286a-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 091aff1ec7cf… |
| openwrt-25.12.5-ath79-nand-zte_mf286a-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 253b09be41c2… |
ImmortalWrt 25.12.1 · ath79/nand
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-nand-zte_mf286a-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 2775e90d96d9… |
| immortalwrt-25.12.1-ath79-nand-zte_mf286a-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 29bbaf6fd325… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the ZTE MF286A ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/nand
Device packages (8)
kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan -ath10k-board-qca9888 ipq-wifi-zte_mf286ar kmod-usb-serial-option uqmi
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/nand
Device packages (8)
kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan -ath10k-board-qca9888 ipq-wifi-zte_mf286ar kmod-usb-serial-option uqmi
Target default packages (33)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-nand-zte_mf286a-initramfs-kernel.bin 091aff1ec7cf702c7a16471c3ea127b791c60d5bbc2c0375bf2ab728ac28c21d openwrt-25.12.5-ath79-nand-zte_mf286a-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the ZTE MF286A? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More ZTE devices
- ZTE E8820 ImmortalWrt firmware
- ZTE MF18A OpenWrt firmware
- ZTE MF269 OpenWrt firmware
- ZTE MF281 OpenWrt firmware
- ZTE MF282 OpenWrt firmware
- ZTE MF282Plus OpenWrt firmware
- ZTE MF283+ OpenWrt firmware
- ZTE MF286 OpenWrt firmware
More devices on ath79/nand
- 8devices Rambutan OpenWrt firmware
- Aerohive HiveAP 121 OpenWrt firmware
- DomyWifi DW33D OpenWrt firmware
- Dongwon T&I DW02-412H (128M) OpenWrt firmware
- Dongwon T&I DW02-412H (64M) OpenWrt firmware
- GL.iNet GL-AR300M NAND OpenWrt firmware
- GL.iNet GL-AR300M NOR OpenWrt firmware
- GL.iNet GL-AR750S NOR OpenWrt firmware
Upstream
Upstream & source
- downloads.openwrt.org — ath79/nand 25.12.5
- downloads.immortalwrt.org — ath79/nand 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.