MikroTik cAP ac OpenWrt Firmware

The MikroTik cAP ac is supported by OpenWrt/ImmortalWrt on the ipq40xx/mikrotik target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ipq40xx/mikrotikmikrotik_cap-ac
ImmortalWrt25.12.1ipq40xx/mikrotikmikrotik_cap-ac

Downloads

Download images

OpenWrt 25.12.5 · ipq40xx/mikrotik

ImageTypesha256
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade7da527e3c8e0
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade-v7.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade-v71419fe0fd221
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_cap-ac-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelc2acafbee2bc

ImmortalWrt 25.12.1 · ipq40xx/mikrotik

ImageTypesha256
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_cap-ac-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel25e3e3bc779f
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade-v7.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade-v74f10681309ae
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade4d6bd66d00eb

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the MikroTik cAP ac ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ipq40xx/mikrotik

Device packages (2)

-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers

Target default packages (33)

apk-mbedtls ath10k-firmware-qca4019-ct base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ipq40xx/mikrotik

Device packages (2)

-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers

Target default packages (40)

apk-openssl ath10k-firmware-qca4019-ct autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade.bin
    7da527e3c8e0f7f790ebb4432377eff444b86f85b8941f12b44c5f6ffd72df65  openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_cap-ac-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the MikroTik cAP ac? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device