MikroTik RouterBOARD 2011UiAS-2HnD OpenWrt Firmware

The MikroTik RouterBOARD 2011UiAS-2HnD is supported by OpenWrt/ImmortalWrt on the ath79/mikrotik target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/mikrotikmikrotik_routerboard-2011uias-2hnd
ImmortalWrt25.12.1ath79/mikrotikmikrotik_routerboard-2011uias-2hnd

Downloads

Download images

OpenWrt 25.12.5 · ath79/mikrotik

ImageTypesha256
openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel2d0f6b6960b2
openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade2ff335712a1b

ImmortalWrt 25.12.1 · ath79/mikrotik

ImageTypesha256
immortalwrt-25.12.1-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelc03d44359cef
immortalwrt-25.12.1-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade36a229af4fcb

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the MikroTik RouterBOARD 2011UiAS-2HnD ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/mikrotik

Device packages (4)

kmod-usb2 kmod-i2c-gpio kmod-sfp kmod-gpio-beeper

Target default packages (32)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ag71xx-legacy kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload kmod-switch-ar8xxx libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls yafut

ImmortalWrt 25.12.1 · ath79/mikrotik

Device packages (4)

kmod-usb2 kmod-i2c-gpio kmod-sfp kmod-gpio-beeper

Target default packages (36)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ag71xx-legacy kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload kmod-switch-ar8xxx libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl yafut

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-initramfs-kernel.bin
    2d0f6b6960b23bbe71c9a7793a4ae62cb19de2c3afd9afd236c91b0cfa6844c3  openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-2011uias-2hnd-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the MikroTik RouterBOARD 2011UiAS-2HnD? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device