MikroTik RouterBOARD 493G OpenWrt Firmware

The MikroTik RouterBOARD 493G is supported by OpenWrt/ImmortalWrt on the ath79/mikrotik target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/mikrotikmikrotik_routerboard-493g
ImmortalWrt25.12.1ath79/mikrotikmikrotik_routerboard-493g

Downloads

Download images

OpenWrt 25.12.5 · ath79/mikrotik

ImageTypesha256
openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-493g-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel7d0d2fb67b6b
openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-493g-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade3e7e95a735f0

ImmortalWrt 25.12.1 · ath79/mikrotik

ImageTypesha256
immortalwrt-25.12.1-ath79-mikrotik-mikrotik_routerboard-493g-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade3d711eae0ccb
immortalwrt-25.12.1-ath79-mikrotik-mikrotik_routerboard-493g-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel47667162423e

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the MikroTik RouterBOARD 493G ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/mikrotik

Device packages (2)

kmod-usb-ohci kmod-usb2

Target default packages (32)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ag71xx-legacy kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload kmod-switch-ar8xxx libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls yafut

ImmortalWrt 25.12.1 · ath79/mikrotik

Device packages (2)

kmod-usb-ohci kmod-usb2

Target default packages (36)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ag71xx-legacy kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload kmod-switch-ar8xxx libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl yafut

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-493g-initramfs-kernel.bin
    7d0d2fb67b6b7dc5270ff858e827a46b15c5b96a4393a503bd9e1f01f202bcdf  openwrt-25.12.5-ath79-mikrotik-mikrotik_routerboard-493g-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the MikroTik RouterBOARD 493G? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device