MikroTik hAP ac2 OpenWrt Firmware

The MikroTik hAP ac2 is supported by OpenWrt/ImmortalWrt on the ipq40xx/mikrotik target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ipq40xx/mikrotikmikrotik_hap-ac2
ImmortalWrt25.12.1ipq40xx/mikrotikmikrotik_hap-ac2

Downloads

Download images

OpenWrt 25.12.5 · ipq40xx/mikrotik

ImageTypesha256
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_hap-ac2-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel19f3cfd71cfa
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_hap-ac2-squashfs-sysupgrade-v7.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade-v7b26250a36281
openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_hap-ac2-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade5ab72254bf9a

ImmortalWrt 25.12.1 · ipq40xx/mikrotik

ImageTypesha256
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_hap-ac2-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelb7f238cd63ee
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_hap-ac2-squashfs-sysupgrade-v7.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade-v72b6400d5d0a5
immortalwrt-25.12.1-ipq40xx-mikrotik-mikrotik_hap-ac2-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradee7077ccda24c

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the MikroTik hAP ac2 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ipq40xx/mikrotik

Device packages (2)

-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers

Target default packages (33)

apk-mbedtls ath10k-firmware-qca4019-ct base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ipq40xx/mikrotik

Device packages (2)

-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers

Target default packages (40)

apk-openssl ath10k-firmware-qca4019-ct autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_hap-ac2-initramfs-kernel.bin
    19f3cfd71cfa9d0bc4cd0a58ec8c8db1c2c570947d3aa91b7d52cf005a53cadb  openwrt-25.12.5-ipq40xx-mikrotik-mikrotik_hap-ac2-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the MikroTik hAP ac2? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device